An advanced material loading system built for the
trailer-based concrete industry
SINGLE HOPPER OR DOUBLE HOPPER (CBL 1 or CBL 2)
units are available depending on your specific needs. Double hopper units
have the ability to carry multiple aggregate mixes or to blend two different
aggregates.
SWING ARM ACTION
allows the conveyor to move in a 120 degree arc and load trailers from
different positions.
MULTIPLE TRAILER STAGING
of as many as five trailers. This can save time on a busy day.
The swing-arm conveyor can move quickly between the pre-positioned trailers.
HIGH-SPEED BELT
loads a yard of dry concrete material into a rotating drum trailer in two minutes.
DRY MATERIAL DISPENSING
into the mixing trailer drum yields a much cleaner concrete operation.
REDUCED WEAR PARTS
means over $1,500 in parts replacement cost savings per year over the old wet auger mixers
WIDE MATERIAL HOPPERS
gives the tractor operator a bigger target during loading and keeps the
mess out of the yard. Piles of gravel on the ground are common with older
systems.
ADDITIONAL DETAILS:
• Mixtures based upon volume of materials
• Extra wide 9’ material hoppers
• 29 inch X 13 foot long swing-arm loading conveyor.
• 6 to 8 cubic yard aggregate storage hoppers.
• 15 or 20 hp. 3 ph. Electric motor
(230/460 volt AC 60 amps)
• Multi pump hydraulic system
• 8’ or 8’8” aggregate hopper load-over height
• Approximately 300 sq. ft. plant and silo footprint
• 200 barrel cement silo (sold separately)
• EPA approved bag air cleaner (with silo)
• Portable silo, optional
• 10’ dia. Cement silo, 20’ high
• Length: 22’ (single hopper with conveyor down.
• Width: 8’
• Shipping weight: 6,000lbs
Specifications subject to change without notice
SINGLE HOPPER OR DOUBLE HOPPER (CBL 1 or CBL 2)
units are available depending on your specific needs. Double hopper units
have the ability to carry multiple aggregate mixes or to blend two different
aggregates.
SWING ARM ACTION
allows the conveyor to move in a 120 degree arc and load trailers from
different positions.
MULTIPLE TRAILER STAGING
of as many as five trailers. This can save time on a busy day.
The swing-arm conveyor can move quickly between the pre-positioned trailers.
HIGH-SPEED BELT
loads a yard of dry concrete material into a rotating drum trailer in two minutes.
DRY MATERIAL DISPENSING
into the mixing trailer drum yields a much cleaner concrete operation.
REDUCED WEAR PARTS
means over $1,500 in parts replacement cost savings per year over the old wet auger mixers
WIDE MATERIAL HOPPERS
gives the tractor operator a bigger target during loading and keeps the
mess out of the yard. Piles of gravel on the ground are common with older
systems.
ADDITIONAL DETAILS:
• Mixtures based upon volume of materials
• Extra wide 9’ material hoppers
• 29 inch X 13 foot long swing-arm loading conveyor.
• 6 to 8 cubic yard aggregate storage hoppers.
• 15 or 20 hp. 3 ph. Electric motor
(230/460 volt AC 60 amps)
• Multi pump hydraulic system
• 8’ or 8’8” aggregate hopper load-over height
• Approximately 300 sq. ft. plant and silo footprint
• 200 barrel cement silo (sold separately)
• EPA approved bag air cleaner (with silo)
• Portable silo, optional
• 10’ dia. Cement silo, 20’ high
• Length: 22’ (single hopper with conveyor down.
• Width: 8’
• Shipping weight: 6,000lbs
Specifications subject to change without notice
